User Tools

Site Tools


network_space_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network_space_v2 [2011/07/15 20:21]
simon
network_space_v2 [2012/09/08 14:16] (current)
82.234.233.9 minor change
Line 2: Line 2:
  
 This page is relevant for Network Space (Max) v2 and Internet Space v2 boards. This page is relevant for Network Space (Max) v2 and Internet Space v2 boards.
 +
 +Since mid-2011 lacie change the hardware configuration of the network space v2 to a lower one, see [[network_space_lite_v2|LaCie Network Space Lite v2]].
  
 ===== Hardware ===== ===== Hardware =====
Line 7: Line 9:
   * CPU ARM926EJ-S (ARMv5TE) 800MHz   * CPU ARM926EJ-S (ARMv5TE) 800MHz
   * SoC Kirkwood 88F6281_A0   * SoC Kirkwood 88F6281_A0
-  * SDRAM memory 256MB, DDR2 533MHz ​ +  * SDRAM memory 256MB, DDR2 267MHz ​ 
-  * SPI flash, NOR 512MB (MACRONIX MX25L4005CMI-12G)+  * SPI flash, NOR 512kB (MACRONIX MX25L4005CMI-12G)
   * Ethernet Gigabit port (PHY MARVELL 88E1116R)   * Ethernet Gigabit port (PHY MARVELL 88E1116R)
   * 1 USB2 port, 1 connector host and 1 connector device (except for Internet Space v2)   * 1 USB2 port, 1 connector host and 1 connector device (except for Internet Space v2)
Line 25: Line 27:
 ===== U-Boot ===== ===== U-Boot =====
  
-The boards are almost fully supported mainline. For more informations,​ see our [[uboot|U-Boot ​main page]] +The boards are almost fully supported mainline. For more informations,​ see our [[ubootforkirkwoodsocs|U-Boot ​for Kirkwood]] page.
- +
-Here are the remaining tasks: +
- +
-  * Initialize MAC address from I2C EEPROM. +
-  * Merge patch "sf: macronix: disable write protection when initializing"​ with mainline. +
-  * Configure GPIO LEDs. +
-  * Enhance the default boot sequence (environment variables).+
  
 ===== Linux ===== ===== Linux =====
  
-The boards are almost fully supported mainline.+The boards are almost fully supported mainline. For more informations,​ see our [[linuxforkirkwoodsocs|Linux for Kirkwood]] page.
  
 ===== Userspace ===== ===== Userspace =====
 +
 +It is also possible to install Debian, look [[debian_install|here]].
 +
 +===== LaCie system =====
 +
 +For more informations about the LaCie stock system, look [[lacie_stock|here]].
 +
network_space_v2.1310761298.txt.gz · Last modified: 2011/07/15 20:21 by simon